mini checkpoint

cava/.config/cava/config

@@ -0,0 +1,136 @@
+## Configuration file for CAVA. Default values are commented out. Use either ';' or '#' for commenting.
+
+
+[general]
+
+# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
+; mode = normal
+
+# Accepts only non-negative values.
+; framerate = 90
+
+# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
+# new as of 0.6.0 autosens of low values (dynamic range)
+# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
+autosens = 1
+overshoot = 0
+
+# Manual sensitivity in %. Autosens must be turned off for this to take effect.
+# 200 means double height. Accepts only non-negative values.
+; sensitivity = 100
+
+# The number of bars (0-200). 0 sets it to auto (fill up console).
+# Bars' width and space between bars in number of characters.
+bars = 0
+bar_width = 1.0
+bar_spacing = 1.0
+
+
+# Lower and higher cutoff frequencies for lowest and highest bars
+# the bandwidth of the visualizer.
+# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
+# Cava will automatically increase the higher cutoff if a too low band is specified.
+; lower_cutoff_freq = 50
+; higher_cutoff_freq = 10000
+
+
+
+[input]
+
+# Audio capturing method. Possible methods are: 'pulse', 'alsa' or 'fifo'.
+# Defaults to 'pulse', 'alsa' or 'fifo', in that order, dependent on what support cava was built with.
+#
+# All input methods uses the same config variable 'source'
+# to define where it should get the audio.
+#
+# For pulseaudio 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
+# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
+#
+# For alsa 'source' will be the capture device.
+# For fifo 'source' will be the path to fifo-file.
+; method = pulse
+source = auto
+
+; method = alsa
+; source = hw:Loopback,1
+
+; method = fifo
+; source = /tmp/mpd.fifo
+
+
+
+[output]
+
+# Ouput method. Can be 'ncurses', 'noncurses' or 'raw'.
+# 'noncurses' is for systems that does not suport ncurses.
+# 'raw' is a 16 bit data stream of the bar heights that can be used to send to other applications.
+# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
+method = noncurses
+
+# Visual channels. Can be 'stereo' or 'mono'.
+# 'stereo' mirrors both channels with low frequencies in center.
+# 'mono' averages both channels and outputs left to right lowest to highest frequencies.
+channels = mono
+
+# Raw output target. A fifo will be created if target does not exist.
+; raw_target = /dev/stdout
+
+# Raw data format. Can be 'binary' or 'ascii'.
+; data_format = binary
+
+# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
+; bit_format = 16bit
+
+# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
+; ascii_max_range = 1000
+
+# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
+# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
+; bar_delimiter = 59
+; frame_delimiter = 10
+
+[color]
+
+gradient = 1
+
+
+gradient_color_1 = '#FFD1DC'  # Pink
+gradient_color_2 = '#FFE4B5'  # Peach
+gradient_color_3 = '#FFFACD'  # Yellow
+gradient_color_4 = '#E0F8D0'  # Light Green
+gradient_color_5 = '#C8F4E0'  # Mint
+gradient_color_6 = '#B5EAD7'  # Teal
+gradient_color_7 = '#D0E1F9'  # Light Blue
+gradient_color_8 = '#E3D4F6'  # Lavender
+gradient_color_9 = '#F6D6E5'  # Rose
+gradient_color_10 = '#FFDDEE' # Pinkish
+
+[smoothing]
+
+# Percentage value for integral smoothing. Takes values from 0 - 100.
+# Higher values means smoother, but less precise. 0 to disable.
+; integral = 50
+
+# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable.
+monstercat = 0
+waves = 0
+
+# Set gravity percentage for "drop off". Higher values means bars will drop faster.
+# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
+gravity = 100
+
+
+# In bar height, bars that would have been lower that this will not be drawn.
+; ignore = 0
+
+
+[eq]
+
+# This one is tricky. You can have as much keys as you want.
+# Remember to uncomment more then one key! More keys = more precision.
+# Look at readme.md on github for further explanations and examples.
+#1 = 1 # bass
+#2 = 1
+#3 = 1 # midtone
+#4 = 1
+#5 = 1 # treble

mako/.config/mako/config

@@ -1,16 +1,18 @@
 sort=-time
+anchor=bottom-right
 layer=overlay
 background-color=#2e3440
 width=480
-height=120
+height=240
-border-size=2
+border-size=1
 border-color=#bac0d0
-border-radius=12
+border-radius=10
 icons=1
 max-icon-size=64
 default-timeout=5000
 ignore-timeout=1
 font=Assistant Bold 12
+outer-margin=40
 
 [urgency=low]
 border-color=#cccccc

niri/.config/niri/config.kdl

@@ -36,8 +36,8 @@ output "eDP-1" {
 output "GIGA-BYTE TECHNOLOGY CO., LTD. G27F 2 23030B002769" {
   mode "1920x1080@170"
   scale 1
-  // Second monitor above
+  // Second monitor to the right
-  position x=0 y=-1080
+  position x=1920 y=0
 }
 
 output "Dell Inc. DELL U2412M YMYH14450KRL" {
@@ -61,6 +61,7 @@ input {
 
             // options "grp:win_space_toggle,compose:ralt,ctrl:nocaps"
         }
+        numlock
     }
 
     // Next sections include libinput settings.
@@ -68,13 +69,13 @@ input {
     touchpad {
         // off
         tap
-        // dwt
+        dwt
         // dwtp
-        // drag-lock
+        drag-lock
         natural-scroll
         // accel-speed 0.2
         // accel-profile "flat"
-        // scroll-method "two-finger"
+        scroll-method "two-finger"
         // disabled-on-external-mouse
     }
 
@@ -118,11 +119,9 @@ layout {
 
     // Mod+R resize layout behaviors 
     preset-column-widths {
-        proportion 0.8
-        proportion 0.66667
         proportion 0.5
+        proportion 0.66667
         proportion 0.33333
-        proportion 0.25
         // Mod+F for full-width
         // fixed 1920
     }
@@ -243,6 +242,14 @@ animations {
 
     // Slow down all animations by this factor. Values below 1 speed them up instead.
     slowdown 2.0
+    window-open {
+        duration-ms 150
+        curve "ease-out-cubic"
+    }
+
+    workspace-switch {
+        spring damping-ratio=1.0 stiffness=1000 epsilon=0.0001
+    }
 }
 
 // Window rules let you adjust behavior for individual windows.
@@ -265,6 +272,11 @@ window-rule {
     open-floating true
 }
 
+window-rule {
+  match title="^$"
+  open-floating true
+}
+
 // Example: block out two password managers from screen capture.
 // (This example rule is commented out with a "/-" in front.)
 /-window-rule {
@@ -320,6 +332,7 @@ binds {
     Mod+B { spawn "blueberry"; }
     Mod+Z { spawn "playerctl" "play-pause"; }
     Mod+X { spawn "playerctl" "next"; }
+    Mod+Shift+B { spawn "pavucontrol"; }
     Mod+Period { spawn "wofi-emoji"; } 
 
     Mod+G { toggle-overview; }

nvim/.config/nvim/init.vim

@@ -36,8 +36,8 @@ Plug 'preservim/nerdtree'
 " Plug 'airblade/vim-gitgutter'
 Plug 'preservim/nerdtree'
 " Plug 'ryanoasis/vim-devicons'
-Plug 'godlygeek/tabular'
+" Plug 'godlygeek/tabular'
-Plug 'preservim/vim-markdown'
+" Plug 'preservim/vim-markdown'
 
 call plug#end()
 

zsh/.zshrc

@@ -63,6 +63,7 @@ plugins=(
   sudo 
   tmux
   kubectl
+  minikube
 )
 
 source $ZSH/oh-my-zsh.sh
@@ -162,3 +163,5 @@ alias bi="bun install"
 alias ba="bun add"
 alias brb="bun run build"
 alias brp="bun run preview"
+
+alias pecha="sleep 20 && echo \"KUCHA\""